Item Added to Cart

You have not viewed any products recently.

30672 Enlarge View
Alternative Views
  • There are no alternate images available for this product.
  • There are no alternate images available for this product.

Toro Fixed Deck Gear Drive Walk Behind 30672 (32 Inch)

sku# 30672
Local Pick up


14.5 hp Kawasaki FS481V 603cc Engine with 32" (81 cm) deck.
Exclusive T-Bar steering
Fast 18,000 ft/min (5,486 m/min) blade tip speed
Fast 6.2 mph (10 km/h) ground speed
Flat-free semi-pneumatic caster tires reduce downtime

14.5 hp* Kawasaki FS481V 603cc
Fuel Capacity
5 gallons (19 L)
Height of Cut
1" to 4-1/4" in 1/8" increments (2.5 cm to 10.8 cm in 3 mm increments)
Drive System
5-Speed Transmission
Air Filter 
2-Stage Air Cleaner
Blade Tip Speed

18,500 ft/min (5,486 m/min)
Brake System
6" (15.2 cm) Band Brakes
Caster Tires
9" x 3.50- 4" (23 cm x 9 - 10 cm) flat free
Deck Design
32" (81 cm) Side Discharge
Drive Tires
13" x 5.00-6" (33 cm x 13 - 15 cm)
Ground Speed
6.2 mph (10 km/h) fwd; reverse assist
Steering Controls

*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Choice of Controls
Choose between traditional Pistol Grip controls, and Toro exclusive, fatigue reducing T-Bar control system. T-Bar steering increases productivity and is ergonomically designed to reduce activation force. Unique operator presence control disengages blades and returns unit to neutral without engine kill.

Compact Models
Compact 36" (91.4 cm) and 40" (101.6 cm) units can easily fit through gates and maneuver around smaller, tightly landscaped properties.

Extended Life Drive
Extended life drive system with Peerless 700 series transmission, featuring a 9-spline drive coupler.

Rugged Spindle Assembly
Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.

T-Bar Curb Hopper Design
Reverse and curb-climbing made easy with patent-pending T-Bar curb hopper design.

Unique Under-The-Deck Skid Plate
Reduces scalping when traveling over uneven terrain and to avoid catching while loading onto trailers.

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.

Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter Design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
The price shown is for the mower picked up at our store.

If you would like a local delivery quote please call 847.233.7890.

Please do not hesitate to Contact Us with any questions you may have.
Online Pricing only. Pricing only valid through online checkout.


Exmark 48" Original Blade 103-2527
Print Page Share