Item Added to Cart

You have not viewed any products recently.

74915 Enlarge View
Alternative Views
  • 74915
  • 74915
  • 74915
  • alt view name
  • alt view name
  • alt view name

Toro Z Master Professional 5000 Riding Mower 74915 (60 Inch)

sku# 74915
Local Pick up


Z Master Professional 5000
27 hp (20 kw) Kohler Command Pro 725cc Engine
with 60 in (1.5 m) TURBO FORCE deck.
Custom seat with 3-D isolation Unitized pump and motor drive system

27 hp* (20 kw) Kohler Command Pro 725cc
Fuel Capacity
Gasoline- 12 gallons (45 L)

Adjustable Discharge Baffle

Air Filter
Dual Element

Blade Tip Speed

18,500 ft/min (5,640 m/min)

Blade Type

.25 in (0.6 cm) thick heat-treated steel
Carrier Frame

3 in x 1.5 in (7.6 cm x 3.8 cm) tubular steel
Caster Tires
13 in x 6.5 in - 6 in (33 cm x 16.5 cm -15.2 cm) flat-free semi-pneumatic

1.625 in (4.1 cm) dia. levers; adjustable
Deck Design
7-gauge 60 in (1.5 m) TURBO FORCE w/ bull-nose bumper
Discharge Chute
High-performance rubber
Drive System
unitized pumps and wheel motors
Drive Tires
24 in x 12 in -12 in (61 cm x 30.5 cm - 30.5 cm)
Ground Speed
10 mph (16.1 kph) forward
Height of Cut
1 in - 5.5 in (2.5 cm - 14 cm) by .25 in (.6 cm) increments
Hydraulic Fluid
Premium synthetic

Folding; standard

Spindle Bearings
Geasable ball bearings
Spindle Housing
Cast Iron

*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

Exclusive Turbo Force Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel, which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

Industry's Toughest Spindle Assembly

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.

Convenience and Comfort
Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter design in a bull-nose bumper
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Folding Rollover Protection System (ROPS)

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

If you would like a local delivery quote please call 847.233.7890.

Please do not hesitate to Contact Us with any questions you may have.
Online Pricing only. Pricing only valid through online checkout.


60" Genuine Toro Hi-Flow Blades 105-7718-03
Print Page Share