Item Added to Cart
 
 
 

You have not viewed any products recently.

 
 
74274 Enlarge View
74274
Alternative Views
  • There are no alternate images available for this product.
 
  • There are no alternate images available for this product.
 

Toro Z Master Professional 7000 Riding Mower 74274 (72 Inch)

sku# 74274
Local Pick up

 

Z580-D - High-torque 25 hp (19 kw) Kubota Diesel 898cc Engine, fast 11.2 mph (18 km/h) ground speed, high-volume 72" (183 cm) TURBO FORCE deck. Industry's toughest spindle assembly Patented adjustable baffle

Engine
25 HP* (19 kw) Kubota Diesel 898cc
Fuel Capacity
Diesel- 12 gallons (45 L)

Air Filter
Dual Stage Canister

Blade Tip Speed

18,500 ft/min (5,640 m/min)

Blade Type

1/4" (6 mm) thick heat-treated steel

Carrier Frame

2" x 2" x 3/16 (5.1 cm x 5.1 cm x 5mm) tubular steel
Caster Tires
13" x 6.5"- 6" (33 cm x 16.5 - 15.2 cm) flat-free

Cooling System
Liquid-Cooled

Controls

1-5/8" (4.1 cm) dia. levers; adjustable
Deck Design
7-gauge 72" (183 cm) TURBO FORCE
Discharge Chute
High-performance rubber
Drive System
Hydraulic 16 cc (1 cu. in.) Hydro-Gear tandem pumps
Drive Tires
24" x 12"- 12" (61 x 30.5cm x 30.5 cm)
Ground Speed
11.2 mph forward (18 km/h)
6.3 mph reverse (10km/h)

Height of Cut
1-1/2" - 5" in 1/4" (3.8cm - 12.7 cm in 6 mm) increments
Hydraulic Fluid
Premium synthetic

ROPS
Folding; standard
Seat
Elastomeric

Spindle Bearings
Tapered roller bearings
Spindle Housing
Cast iron with 9-3/8" (23.8cm) base

Disclaimer
*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Exclusive Turbo Forse Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel, which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.


Industry's Toughest Spindle Assembly

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles.
The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.

Convenience and Comfort
Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.


High-performance Discharge Chute

High performance 5/16" (8 mm) rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.


Smarter design in a bull-nose bumper
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Folding Rollover Protection System (ROPS)

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tip overs. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.


Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Powerful Engines

The Kubota 23 hp (17.2 kw) liquid-cooled diesel engines are geared for high torque while also delivering fast 11.2 mph (18 kph) ground speeds. The powerful, yet fuel-efficient engines come in a compact package that is exceptionally well balanced for low vibration. The liquid-cooled system ensures cleaner combustion and extended engine life.

If you would like a local delivery quote please call 847.233.7890.

Please do not hesitate to Contact Us with any questions you may have.
Online Pricing only. Pricing only valid through online checkout.

Accessories

OEM Toro Blade 105-7784-03
 
Print Page Share