In stock

Toro Floating Deck Hydro Drive Walk Behind 30488 (48 Inch)

Price $7,777.00
In Store Purchase Only
18.5 hp Kawasaki 603cc Engine with 48" TURBO FORCE deck, Twin-Lever controls.
TURBO FORCE 7-gauge deck
Patented adjustable discharge bafffle
Robust 9-3/8" (23.8 cm) cast iron spindle housings

18.5 hp* Kawasaki 603cc
Fuel Capacity
5 gallons (19 L)
Height of Cut
1" to 4-1/2" (2.5 cm to 11.4 cm) quick change
Electric Start
Adjustable Discharge 
Blade Tip Speed

18,300 ft/min (5,578 m/min)
Caster Tires
9" x 3.50- 4" (23 cm x 9 - 10 cm) flat free
Deck Design
48" (122 cm) 7-gauge TURBO FORCE
Discharge Chute
Reinforced rubber
Drive Tires
16" x 7.50 - 8" (40.6 x 19.1 - 20.3 cm)
Ground Speed
6.2 mph (10 km/h) fwd; 2.5 mph (4 km/h) rev
Hydraulic Drive
Twin Hydro-Gear Pumps
Premium Synthetic
Spindle Housing
9-3/8" (23.8 cm) diameter cast iron
Steering Controls

*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Commercial Grade Contruction
The 7-gauge deck shell is further reinforced by a bull-nose front bumper, a 1/2" (1.3 cm) thick wear guard on the trim side, and a 3/8" (1 cm) thick reinforcement plate around the discharge opening.

Flat-Free Caster Tires
Semi-pneumatic flat-free caster tires decrease downtime by eliminating flats.

Rugged Carrier Frame
Rugged carrier frame; 2" x 2" x 12" (5.1 cm x 5.1 cm x 30.5 cm) tubular steel construction is the industry's largest and most durable.

Easy Height of Cut
Easy to change, vertical pin height of cut system provides cutting heights ranging from 1" (2.5 cm) to 4-1/2" (11.4 cm) in 1/4" (6 mm) increments

Premium Hydraulics

Independent, commercial-duty .6 cu. in. (10 cc) displacement pumps and wheel motors provide instant forward and reverse control without shifting.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

The Industry's toughest spindle assembly

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions

The price shown is for the mower picked up at our store.

If you would like a local delivery quote please call 847.233.7890.

Please do not hesitate to Contact Us with any questions you may have.

Customer Login