Exmark Radius S-Series RAS651GKA48CA3 48 In. Mower
UltraCut Deck Technology
- Exmark’s exclusive UltraCut decks are featured on Radius models. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
Quick Adjustable Rollover Protection System (ROPS)
- Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Heavy Duty Unibody Frame
- Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Height of Cut Made Easy
- The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
|Blade Spindles||No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.|
|Drive Tires||23 x 9.5-12 Super Turf|
|Tractor Frame||Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.|
|Steering Control||Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.|
|Front Caster Tires||13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)|
|Parking Brake||Lever-actuated pawl brake.|
|Seat||Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch|
|Electrical||12-volt battery with 15-amp alternator.|
|Standard Features||Engine hour meter, cup holder, tow hitch and jack receiver|
|Engine Speed||3700 rpm|
|Air Filter||Cyclonic Air Cleaner|
|Fuel Type||Gas Carbureted|
|Fuel Capacity||7-gallon (26.5-L) single fuel tank with single fill location.|
|Fuel Indicator||Translucent Visual|
|Drive Description||Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.|
|Speed||Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.|
|Deck Lift||Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.|
|Safety Package||Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.|
|ROPS||2-post foldable ROPS standard with seat belt and latch.|
|PTO Engagement||MagStop electromagnetic 125-ft-lb clutch|
|Drive Wheel Release||Allows unit movement without engine running.|
|Casters||.375" thick caster yoke arms|
|Width / Cutting Deck||48"|
|Deck Style||Floating Deck|
|Deck Style Description||Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.|
|Deck Construction||10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.|
|Blade Tip Speed||Approximately 18,500 fpm.|
|Cutting Heights||1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.|
|Blades||2 Blades at 24.5" Length|
Write Your Own Review
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.