Skip to content
FREE SHIPPING on online orders over $100!*
FREE SHIPPING on online orders over $100!*

Scag SFC30-7CV-S 30 In. Swivel Walk-Behind Mower

by SCAG
SKU SFC30-7CV-S
Availability:
Low stock
Original price $2,999.00 - Original price $2,999.00
Original price
$2,999.00
$2,999.00 - $2,999.00
Current price $2,999.00

Features:

MOW WITH EASE

FRONT SWIVEL CASTER WHEELS

  • Front swivel caster wheel model offers increased ease of maneuverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

FULLY FABRICATED AND WELDED STEEL CUTTER DECK

MILITARY-GRADE STEEL - DECK

  • Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.

FULLY FABRICATED AND WELDED STEEL FRAME

MILITARY-GRADE STEEL - FRAME

  • Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.

SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT

FINE-TUNED AND SIMPLE

  • Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.

OFFSET BLADE SET UP

SIMPLIFIED DECK DRIVE SYSTEM

  • An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.

SCAG LEVEL QUALITY-OF-CUT

UNMATCHED PERFORMANCE

  • The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.

OPERATOR CONTROL PANEL

ERGONOMIC CONTROLS

  • Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.

OVERSIZED ADJUSTABLE CONTROLS

ACHIEVE MAXIMUM COMFORT

  • Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.

DISCHARGE – MULCH – BAG

3-IN-1 VERSATILITY

  • The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag

POWERFUL TRANSMISSION & ENGINE COMBO

MAXIMUM POWER FOR TOUGH CUTS

  • The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

***This item does not qualify for free shipping***

Specifications
Engine Kohler 224CV engine – recoil-start engine, Swivel Front Caster
Drive System GT MV 702 Transmission
Parking Brake Hand lever
Tires, Rear Spec 10.5" x 3" rubber tire w/ glass-filled polypropylene wheel
Tires, Front Spec 9” x 2.25” rubber tire w/ glass-filled polypropylene wheel
Top Speed Forward: Up to 4 mph
Transport Length (handles in upright transport position): 44"
Length Minimum (handles in highest operating position): 69" | Max (handles in lowest operating position): 76.5"
Width (w/ discharge chute): 36.75" | (w/ discharge block off plate): 31.5" | Tracking: 28.75"
Height Lowest Operating: 36.75" | Max Operating: 45.25" | w/ Handle Bar in Storage Position: 57.5" | Cutting: 1.5" to 5" in .25" increments.
Cutting Width 30"
Fuel Capacity 1 gallon
Bag 2.5 Bushels
Weight Bagging: 233 lbs. | Mulching: 227 lbs. | Discharging: 226 lbs.
Spindle Type Aluminum housing with sealed ball bearings.

⚠ #2 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and, which are know to the the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.